Estimate energy capacity and continuous output for the devices and backup duration you enter. Enable JavaScript to use this calculator. Daily energy is the sum of each device’s running watts × quantity × hours per day × duty cycle. The selected backup days are multiplied by daily energy and a 25% planning buffer. Required continuous output is the sum of the selected devices’ running watts at once. Appliance presets are editable typical estimates, not measured readings. Refrigerator duty cycle defaults to a 40% planning estimate only; actual cycling depends on the appliance, temperature, settings, and conditions, so adjust it for your scenario. Duty cycle is used in daily energy and sizing calculations. Run-everything-at-once mode does not use hours per day or duty cycle. The 85% efficiency default is an estimate. Start-up surge multipliers are estimates and are not substitutes for appliance or station specifications. Actual runtime varies with conversion losses, temperature, battery age, output type, and operating conditions. These calculations are for planning and do not guarantee performance. The buffer provides planning margin for losses and variation. It does not guarantee a specific runtime. It is the combined running wattage of all selected devices assumed to run simultaneously. Check start-up and device-specific requirements separately.How this works
Assumptions and limitations
Frequently asked questions
Why add a capacity buffer?
What does continuous output mean here?